Hotline: +7 (495) 228-30-45

Manufactured goods Vehicle

Manufactured goods Vehicle -


Size and weight
Engine, speed and fuel-efficiency
Transmission, brakes and tyres
Wheel arrangement 4х4
Seating accommodation 2
Length, mm 4465
Width, mm 1940
Height, mm 2487
Wheel base, mm 2550
Road clearance, mm 210
Fording depth, mm 500
Curb weight, kg 1866
Gross weight, kg 3070
Load capacity, kg 1204
Engine Petrol ZMZ-4091
Fuel Petrol A-92
Volume, l 2,693
Maximum output, hp (kW) 112 (82,5) at 4250 rpm
Maximum torque, Nm (kgf/m) 198 at 2500 rpm
Fuel tank capacity, l 50
Transmission manual, 5-speed
Transfer case 2-speed with shutting off the front axle
Front brakes disk-type
Rear brakes drum-type
Tyres 225/75 R16


Framing structure of the van +
Frame supporting structure and foundation of the frame made of roll-formed channel or pressed section with shaped tubes +
Frame supporting structure and the frame painted with antirusting enamel +
Vertical struts of the frame are made of shaped tubes +
Exterior is furnished with galvanized sheet with polymer coating. The sheet is fixed to the vertical struts by interlocking joint with blind rivets +
Edging of the van is made with aluminium. Top corner joints connecting the frame of the van are covered with ABS plastic angle +
Rear splitdoors with 270 degrees split angle +
Fitments of the locking mechanisms, door hinges (galvanized metal) +
External rod-type locking mechanism made of antirusting material +
Portal frame edging (painted metal) +
Bolted connector to the on-board power line of the vehicle +
Lower back panel +
The floor covered with laminated plywood 21 mm with antislip coating +
Inside light 1 roof light 12V +

Please fill in your request